Sony BDP-S550

Discussion of Features on the Hardware Info Site

Sony BDP-S550

Postby DAve » Wed Feb 27, 2008 3:22 am

Please discuss the Sony BDP-S550 in this thread.
DAve
LPCM
 
Posts: 413
Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA

7.1 analog

Postby TOOLhead08 » Tue Feb 24, 2009 4:13 am

Is there a difference if you use 7.1 analog vs. HDMI for the audio? Is the analog mainly for people who do not have receivers?
TOOLhead08
DTS
 
Posts: 29
Joined: Thu Oct 23, 2008 4:16 am
Location: San Lorenzo, CA

Postby DAve » Tue Feb 24, 2009 4:18 am

My receiver has 8 chan analog in but is way too old for HDMI.

I would probably tend to use HDMI if I could.

It may be worth checking it out with analog, but I suspect you will get either no difference or a slight preference to HDMI.

If you prefer analog, then use that :D
DAve
LPCM
 
Posts: 413
Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA

Postby TOOLhead08 » Tue Feb 24, 2009 4:26 am

So the 7.1 analog option is for receivers that do not have HDMI, and that you still need a receiver to get audio. I thought you can just plug the wires from the speakers and you're good to go. Do'h!

Thanks Dave.
TOOLhead08
DTS
 
Posts: 29
Joined: Thu Oct 23, 2008 4:16 am
Location: San Lorenzo, CA

Postby DAve » Tue Feb 24, 2009 4:33 am

Yeah the analogs are still line level - you need an amp...! :D
DAve
LPCM
 
Posts: 413
Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA

Postby TOOLhead08 » Fri Feb 27, 2009 3:21 am

Hey Dave,

My S550 is currently connected to my router since it is in my bedroom. If I decide to use the player in the living room, what's the best way to get a wireless connection?
TOOLhead08
DTS
 
Posts: 29
Joined: Thu Oct 23, 2008 4:16 am
Location: San Lorenzo, CA

Postby DAve » Fri Feb 27, 2009 4:26 am

I am not much of a wireless guru, though I think you need a bridge or access point.

IIRC, there were a number of fairly inexpensive options for taking game consoles from wired to wireless - something like that might work.

Or something to make a network printer wireless...

Hope that helps.
DAve
LPCM
 
Posts: 413
Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA

Postby jerry0503214 » Fri Nov 25, 2011 5:06 pm

So the 7.1 analog option is for receivers that do not have HDMI, and that you still need a receiver to get audio. I thought you can just plug the wires from the speakers and you're good to go. Do'h!
jerry0503214
Dolby Digital
 
Posts: 1
Joined: Fri Nov 25, 2011 5:04 pm

All services

Postby SeRvicePak » Sun Apr 08, 2012 1:30 am

Absolutely with you it agree. It is excellent idea. I support you.
SeRvicePak
Dolby Digital
 
Posts: 1
Joined: Mon Jan 16, 2012 4:44 am
Location: Alpharetta, Ga, USA


Return to Hardware Info Site Features

Who is online

Users browsing this forum: No registered users and 1 guest