Discussion of Features on the Hardware Info Site
DAve
LPCM
Posts: 420 Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA
Post
by DAve » Wed Feb 27, 2008 3:22 am
Please discuss the Sony BDP-S550 in this thread.
TOOLhead08
DTS
Posts: 29 Joined: Thu Oct 23, 2008 4:16 am
Location: San Lorenzo, CA
Post
by TOOLhead08 » Tue Feb 24, 2009 4:13 am
Is there a difference if you use 7.1 analog vs. HDMI for the audio? Is the analog mainly for people who do not have receivers?
DAve
LPCM
Posts: 420 Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA
Post
by DAve » Tue Feb 24, 2009 4:18 am
My receiver has 8 chan analog in but is way too old for HDMI.
I would probably tend to use HDMI if I could.
It may be worth checking it out with analog, but I suspect you will get either no difference or a slight preference to HDMI.
If you prefer analog, then use that
TOOLhead08
DTS
Posts: 29 Joined: Thu Oct 23, 2008 4:16 am
Location: San Lorenzo, CA
Post
by TOOLhead08 » Tue Feb 24, 2009 4:26 am
So the 7.1 analog option is for receivers that do not have HDMI, and that you still need a receiver to get audio. I thought you can just plug the wires from the speakers and you're good to go. Do'h!
Thanks Dave.
DAve
LPCM
Posts: 420 Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA
Post
by DAve » Tue Feb 24, 2009 4:33 am
Yeah the analogs are still line level - you need an amp...!
TOOLhead08
DTS
Posts: 29 Joined: Thu Oct 23, 2008 4:16 am
Location: San Lorenzo, CA
Post
by TOOLhead08 » Fri Feb 27, 2009 3:21 am
Hey Dave,
My S550 is currently connected to my router since it is in my bedroom. If I decide to use the player in the living room, what's the best way to get a wireless connection?
DAve
LPCM
Posts: 420 Joined: Sat Feb 23, 2008 2:48 am
Location: Santa Clara, CA
Post
by DAve » Fri Feb 27, 2009 4:26 am
I am not much of a wireless guru, though I think you need a bridge or access point.
IIRC, there were a number of fairly inexpensive options for taking game consoles from wired to wireless - something like that might work.
Or something to make a network printer wireless...
Hope that helps.
jerry0503214
Dolby Digital
Posts: 1 Joined: Fri Nov 25, 2011 5:04 pm
Post
by jerry0503214 » Fri Nov 25, 2011 5:06 pm
So the 7.1 analog option is for receivers that do not have HDMI, and that you still need a receiver to get audio. I thought you can just plug the wires from the speakers and you're good to go. Do'h!
SeRvicePak
Dolby Digital
Posts: 1 Joined: Mon Jan 16, 2012 4:44 am
Location: Alpharetta, Ga, USA
Contact:
Post
by SeRvicePak » Sun Apr 08, 2012 1:30 am
Absolutely with you it agree. It is excellent idea. I support you.